開關電源S-200系列
***格、高可靠 Low price and high reliability
105℃輸出電容器 105℃ output capacitor
***適用AC輸入電源 AC input power suitable for the world
效率高、工作溫度低 High efficiency and low operation temperature
軟啟動電流、有效降低AC輸入沖擊 Soft-start current can reduce the AC input impact efficiency
有短路保護、過載保護 With short-circuit and overload protection
體積小、重量輕 Compact size, light weight
100﹪滿負荷燒機測試 100﹪full-load burn-in test
內裝EMI濾波器、紋波*** Installed with EMI filter, minimum w***e
|
型號 Mode
性能 Performance |
S-200-5 |
S-200-12 |
S-200-15 |
S-200-24 |
S-200-48 |
|
直流輸出電壓 DC output voltage |
5V |
12V |
15V |
24V |
48V |
|
輸出電壓公差 Output voltage tolerance |
&plu***n;2﹪ |
&plu***n;1﹪, |
&plu***n;1﹪ |
&plu***n;1﹪ |
&plu***n;1﹪ |
|
額定輸出電流 Rated output current |
40A |
16.5A |
13.3A |
8.5A |
4.2A |
|
輸出電流范圍 Output current range |
0-40A |
0-16.5A |
0-13.3A |
0-8.5A |
0-4.2A |
|
紋波及噪音 Ripple and noise |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
75mVp-p |
|
進線穩定度 Inlet stability |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
|
負載穩定度 Load stability |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
&plu***n;0.5﹪ |
|
直流輸出功率 DC output power |
200W |
198W |
200W |
200W |
200W |
|
效率 Efficiency |
80﹪ |
84﹪ |
84﹪ |
85﹪ |
85﹪ |
|
直流電壓可調范圍 Adjustable range for DC voltage |
4.75,-5.5﹪ |
10.8—13.2V |
13.5—16.5V |
13.5—16.5V |
43—53V |
|
輸入電壓范圍 AC input voltage range |
170～264VAC/47～63Hz; 248～370VDC
|
||||
|
輸入電流 Input current |
4.2A/115V 2.2A/230V |
||||
|
沖擊電流 AC dash current |
冷啟動電流 30A/115V 60A/230V Cold-start current 30A/115V 60A/230V |
||||
|
漏電流 Leakage current |
＜3.5mA/240VAC |
||||
|
過載保護 Overload protection |
105﹪～150﹪類型：電流限制 復位：自動*** 105﹪～150﹪ Type: pulsing hiccup shutdown reset: auto recovery |
||||
|
過電壓保護 Over-voltage protection |
………………… |
||||
|
高溫保護 High-temperature protection |
…………………. |
||||
|
溫度系數 Temperature coefficient |
&plu***n;0.03﹪/℃(0～50℃) |
||||
|
啟動、上升、保持時間 Startup .rise .retention time |
200ms 100ms 20ms |
||||
|
抗震性 Vibration |
10～500Hz, 2G 10min/1周期，時長60分鐘，各軸 10～500Hz, 2G 10min/1 cycle , Period for 60 min , Each axes |
||||
|
耐壓性 With standard voltage |
輸入輸出間：1.5KvAC輸入與外殼： 1.5KvAC輸出外殼： 0.5KvAC Input and output internal ：1.5KvAC input and enclosure ： 1.5KvAC output and enclosure： 0.5KvAC |
||||
|
隔離電阻 Isolation resistance |
輸入輸出間： 輸入與外殼，輸出與外殼：500VDC/100MΩ Input and output internal: input and enclosure. Output and enclosure: 500VDC/100MΩ |
||||
|
工作溫度、濕度 Working temperature and humidity |
-10℃～+60℃(參考輸出特***)，20﹪～90﹪RH -10℃～+60℃(Refer to output ，20﹪～90﹪RH |
||||
|
存儲溫度、濕度 Store temperature and humidity |
-20℃～+85℃, 10%～95%RH |
||||
|
外型尺寸 Overall dimension |
199×110×50mm |
||||
|
重量 Weight |
0.9kgs |
||||
|
安全標準 Safety standa*** |
UL1012 TUV按6050（IEC,UL1950）認證 UL 1012 TUV EN6050(IEC,UL1950) Approved |
||||
|
EMC標準 EMC standa*** |
滿足FCC部分15J條件等級B Meet FCC PART 15J condition class B |
||||
|
備注： 1.以上參數測試條件為：230VAC輸入，額定負載,25℃ 70%Rh,溫度。 2．容差： 包括設定容差，線路穩定度，負載穩定度 3．紋波測試：20MHz用“A12”雙絞線，中斷用0.1uF&47uF電容器短路。 4．進線電壓穩定度測試：滿負載時進線***低電壓到***高電壓。 5．負載穩定度測試：負載從0%到100% Note : 1. The testing condition for the parameter above is : 230VAC input ,rated load, 25℃ 70%Rh. Temperature. 2. Error, include the setting error, line stability and load stability . 3. W***e test: adopt “A12” double wire for 20MHz, and 0.1UF & 47UF capacitor short-circuit for interrupting. 4. Inlet voltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage. 5. Load stability test: The load is from 0% to100% |
|||||