福斯FUCHS RENOLIN UNISYN CKC68合成齒輪油
福斯FUCHS RENOLIN UNISYN CKC68合成齒輪油
福斯FUCHS RENOLIN UNISYN CKC68合成齒輪油
設計用于工業齒輪箱和一般的潤滑系統受高溫，RENOLIN UNISYN CKC油是全合成潤滑油基于聚α-烯烴。RENOLIN UNISYN CKC油減少摩擦、降低磨損。此外，這些油提高了機器部件的效率。根據不同的應用，多個粘度等級可以由一個單一的RENOLIN UNISYN CKC油滿意。這可以讓用戶合理化庫存和降低成本。聚α烯烴，從而RENOLIN UNISYN CKC油，可與礦物油都比兼容，可設置等。與普通機械材料聚α烯烴的相容性，密封和油漆與礦物油的比較。改變過去RENOLIN UNISYN CKC因此非常簡單，無需事先沖洗。RENOLIN UNISYN CKC油可分為CKC潤滑油根據ISO 6743-6
使用RENOLIN UNISYN CKC油的具體利益：
耐老化性好
優良的防腐蝕保護
良好的流動性
優良的粘度-溫度特性
應用：
RENOLIN UNISYN CKC油可用于軸承、潤滑系統和高或溫度波動變速箱。
在齒輪箱和潤滑系統的油底殼溫度超過90°C，普通礦物油更換周期可以顯著延長RENOLIN UNISYN CKC油，反過來，大幅降低運營和處置成本。
當改用RENOLIN UNISYN CKC油的機器和設備，經營超過60°C的溫度，比普通礦物油等級應選擇低粘度等級。
| RENOLIN UNISYN CKC | 68 | 100 | 150 | 220 | 320 | 460 | 680 | ||
| Lubricating oil type | |||||||||
| acc. to ISO 6743-6 | CKC 68 | CKC 100 | CKC 150 | CKC 220 | CKC 320 | CKC 460 | CKC 680 | ||
| acc. to DIN 51 502 | HC 68 | HC 100 | HC 150 | HC 220 | HC 320 | HC 460 | HC 680 | ||
| Characteristics | Unit | Test method | |||||||
| Kinematic viscosity | |||||||||
| at 40 °C | mm²/s | 72 | 104 | 151 | 221 | 315 | 479 | 668 | ASTM D 445 |
| at 100 °C | mm²/s | 11.1 | 14.9 | 19.4 | 25.8 | 33.3 | 45 | 62 | ASTM D 445 |
| Viscosity index | 146 | 149 | 147 | 148 | 148 | 149 | 159 | ASTM D 2270 | |
| Density at 15 °C | kg/l | 0.837 | 0.842 | 0.848 | 0.85 | 0.851 | 0.853 | 0.855 | ASTM D 1298 |
| Flash point, Cleveland open cup | °C | 248 | 254 | 230 | 232 | 234 | 304 | 262 | ASTM D 92 |
| Pour point | °C | -51 | – 45 | – 45 | – 42 | – 39 | – 33 | – 33 | ASTM D 97 |
| Neutralization number | mg KOH/g | 0.8 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | 0.9 | ASTM D 974 |
| Foaming, | |||||||||
| seq. I | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III |
| seq. II | ml | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | 15/0 | ASTM D 892 seq. I III |
| seq. III | ml | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | 5/0 | ASTM D 892 seq. I III |
| Copper corrosion | degree of corr. | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | 1a-100A24 | ASTM D 130 |
| Rust prevention | pass B | pass B | pass B | pass B | pass B | pass B | pass B | ASTM D 665 | |
| Four ball EP test | N | 2200 | 2400 | 2400 | 2400 | 2400 | 2400 | 2400 | ASTM D 2783 |
| FZG mechanical gear rig test | load stage | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | > 12 | DIN 51 354-2 |